FPV Racing Drone (160)

As we said before, we will explore more fun with Dave_C in the new field of #micro long range. We did it! After the success of Explorer LR 4, everyone has many new needs. For example: I hope it can carry a full-size gopro! I hope it is perfect for freestyle and cruising! I hope it has Bluetooth function! We are proud to announce that Hexplorer Hexa-copter is finally here! Continue to develop new products to meet the needs of more users. HEXplorer LR 4 Analog BNF Specification : Goku F411 hex nano stack 16x16 & Goku Hm600 600mw vtx Caddx Ant camera Dave_C & Nin 1404 V2 2750kv motors Goku M8N mini gps v2.0 Flywoo Finder v1.0 Gemfan 4024 props Atomic 5.8 G antenna LHCP  Note: SMO 4K Camera/Naked Gopro Mount/ SMO 4K Mount/ Install360 Go Mount is NOT INCLUDED!! Recommend Battery: Naked Gopro & SMO 4K & Insta360 go  ---Explorer 18650 Gopro 5/6/7/8 & Insta360 One R ---- Tattu 1050 4s mah or 850 4s mah Highlights & Specification: 1. Equipped with GOKU HEX F411 16X16 NANO STACK, and NIN 1404 v2-2750kv, support 4s battery. Use powerful STM32F411 chip,5V/2A BEC, black box, WS2812LED,support 2 complete hardware, 1 serial ports, I2C and other functions are all open ! Enough to meet all FPV needs. 2. As Dave C said，If you want the smallest and quietest platform to able to carry a full GoPro while still having good flight times and performance - Get the Hex! 3. The Hex LR is perfect for pilots who prefer freestyle. Not just cruising.  4. Caddx Ant camera gets better images & Goku HM600 600mw Vtx gets longer range! ! 5. Using Flywoo Goku Mini GPS V2.0, searching for satellites is faster and more stable than the V1.0 6. All versions have been solder power cables for SMO 4K , If you want to use naked gopro 6/7/8, just change the power plug .  Package Included: 1* Flywoo HEXplorer LR 4 4S Hexa-copter - Analog

Description: As we said before, we will explore more fun with Dave_C in the new field of #micro long range. We did it! After the success of Explorer LR 4, everyone has many new needs. For example: I hope it can carry a full-size gopro! I hope it is perfect for freestyle and cruising! I hope it has Bluetooth function! We are proud to announce that Hexplorer Hexa-copter is finally here! Continue to develop new products to meet the needs of more users. “ The Flywoo Explorer made a new class of quads mainstream: Micro Long Range! These quads are a compact, sub 250g 4" platform that will still allow you an impressive range and flight times of over 30 minutes on Lithium-Ion packs. Next to these 4" platforms we do see more and more light 5" quads geared towards long flight times. They are usually over 250g but overall faster and capable of carrying heavy loads like full GoPros - Something I wouldn't recommend on 4" where a naked GoPro is a much better choice. Instead of moving up to a bigger prop size for these increased payloads, Flywoo applied some really cool out of the box thinking and created the HEXplorer! Six 4" props have indeed almost the exact same disc area a 5" quad has. Disc load and therefore the overall noise level gets reduces a lot compared to the Explorer when you carry a heavy 4S Li-Ion and a GoPro, while power and freestyle capabilities are increased on lighter packs. So to summarize things: If you want super long flight times and range while staying sub 250g - Get the Explorer! If you want the smallest and quietest platform to able to carry a full GoPro while still having good flight times and performance - Get the Hex! “  ------Dave_C HEXplorer LR 4 Vista / Nebula pro BNF Specification : Goku F745 hex nano stack 16x16 Dave_C & Nin 1404 V2 2750kv motors Goku M8N mini gps v2.0 Flywoo Finder v1.0 Flywoo Bt-nano Bluetooth module Gemfan 4024 props Atomic 5.8 G antenna LHCP  Note:  SMO 4K Camera/Naked Gopro Mount/ SMO 4K Mount/ Install360 Go Mount is  NOT INCLUDED!! Recommend Battery :  Naked Gopro & SMO 4K & Insta360 go  ---Explorer 18650 Gopro 5/6/7/8 & Insta360 One R ---- Tattu 1050 4s mah or 850 4s mah  Highlights & Specification: 1. Equipped with GOKU HEX F745 16X16 NANO STACK, and NIN 1404 v2-2750kv, support 4s battery. Use powerful F745 BGA chip，barometer, black box, WS2812LED， support 7 complete hardware serial ports, I2C and other functions are all open ! Enough to meet all FPV needs. 2. As Dave C said， If you want the smallest and quietest platform to able to carry a full GoPro while still having good flight times and performance - Get the Hex! 3. The Hex LR is perfect for pilots who prefer freestyle. Not just cruising.  4. Flywoo Bt-nano Bluetooth ModuleYou can use mobile devices to set the parameters of the flight controller. 5. Using Flywoo Goku Mini GPS V2.0, searching for satellites is faster and more stable than the V1.0  6. All versions have been solder power cables for SMO 4K , If you want to use naked gopro 6/7/8, just change the power plug .  7. Caddx Nebula Pro performed very well! Highly recommended Package Included:  Flywoo HEXplorer LR 4 4S Hexa-copter -Caddx Vista

Preorder now. It will be in stock on January 06, 2021. Specification: Brand name: Diatone Item name:  ROMA F5 6S FPV Racing Drone XMAS LIMITED EDITION VERSION Roma F5 DJI 6S Xmas Edition Version Camera: DJI AirAntenna:  MAMBA  UltrasVTX: DJI Air UnitFC: MAMBA F405DJIESC: MAMBA F50PROMotor: MAMBA  TOKA 2207.5  1700KV Propeller: Gemfan 51433 Xmas Edition GPS Module Roma5  6s PNP Multirotors Xmas Edition Version Camera: RUN CAM PHOENIX2 Antenna: MAMBA Ultras VTX: MAMBA TX400 400MW FC: MAMBA F722S ESC: MAMBA F50PRO Propeller: Gemfan 51433 Xmas Edition  Motor: MAMBA TOKA 2207.5 1700KV Pacakge Included: 1 x ROMA F5 6S FPV Racing Drone XMAS LIMITED EDITION VERSION (PNP/ DJI  Optional) 4 x Gemfan 51433 Xmas Edition Props (2xcw 2xccw) 1 x Injection suit 1 x Buzzer2 x Lipo Strap1 x Universal Adjustable Gopro Mount1 x M2 Screws Pack1 x M3 Screws Pack1 x 20mm PC isolation Sheet  1 x 30.5mm PC isolation Sheet

Specification: Brand Name: GEELANG Model: Anger 85X 1080P HD Item Name: 85mm F4 2-3S 2 Inch FPV Racing Drone Wheelbase:85mmSize:118mm*118mm*70mmWeight:59g(without battery)Recommend 3S 450mAh lithium battery, flight time can reach 6 minutes 30 seconds -7 minutes GL1202 8700KV Motor Stator specifications: D12 * H4 0.2mm Configu-ration: 9N12PStator Diamter: 12mmStator Length: 2mmShaft Diameter: Φ1.5mmWinding Specifications: 180℃ Class Multiple oxygen-free copperWeight: 3.4gNo.of Cells: 2-3S Lipo F4 Flight Controller Built-in 5A 4in1 ESC Name: SH50AF4 MATEKF411MCU: STM32F411CEU6 (100MHZ, 512K flash memory)Sensor: MPU-6000 (SPI connection)Shop: 8MB black box onboardBoard size: 28.5 * 28.5MMPower supply: 2-3S battery input (DC 7-12.6V)Built-in 5A (each) Blheli_S 4 in 1 ESC Dshot600 readyBuilt-in Betaflight OSD (SPI control)Built-in 5V 2A BECBuilt-in voltage detectionThe onboard 4-in-1 ESC MCU is upgraded to EFM8BB21Power supply: 2-3S LiPo / LiPo HV (7v / 12.6v)Current: 5A continuous peak value 7A (5 seconds)Support BLHeliSuite programmableFactory firmware: G_H_50_REV16_77.HEXDefault protocol: DSHOT600 Optional Receiver Without Receiver Version NO Receiver AC900 Receiver Version with External AC900 Receiver - compatible Frsky (ac900)SPI receiver Frsky D16 switchable - compatible futaba s-fhss switchable - Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): =300m Frsky XM+ RX Version with Frsky XM+ SPI receiver, Frsky XM+ LBT-D16 mode (need to download and use firmware in frsky)No ground interference ( Transmitter and receiver 1 m from the ground): >300mFailsafe support Compatible Flysky RX Version compatible Flysky receiver Version SPI BUS receiverProtocol: AFHDS-2AChannels: 14ch（AFHDS-2A）No ground interference ( Transmitter and receiver 1 m from the ground):= 300mFailsafe support Compatible DSMX RX Version Compatible DSMX receiver version SPI BUS receiverNo ground interference (the transmitter and receiver are 1 m away from the ground): = 300m TBS Crossfire RX Receiver with TBS Crossfire Nano RXCRSF Protocol , compatible Official TBS transmitter  No ground interference ( Transmitter and receiver 1 m from the ground): >300mFailsafe support 5.8G 40CH 25-200mW VTX VTX output power: 25~200mw adjustableFrequency: 40CHInput voltage: 3.2V- 5.2VCurrent consumption: 320mA (type)Power switching: three gears (25MW, 100MW, 200MW)Antenna frequency: 5.8GHz 5 frequency band 40 channelsBand competitionReady for smart audioWeight: 1.9 gLED: RGB LED light strip, adjustable flight control Caddx Baby Turtle Camera Resolution: 800TVLVideo standard: 1080p 60fpsField of view: 170 degreesScreen size: 4:3, 16:9Maximum supported recording capacity: 64g u1Power supply: 5v-20vCurrent: 12v / 160maWeight: 9g Gemfan 2030 3-Blade Propeller Quantity: 4 CW & 4 CCW Lipo Battery Item Name: 3S 450mAh Lipo Battery Quantity: 1 PC Package Included: 1x GEELANG Anger 85X 1080P FPV Drone 1x screw driver1x 3S 450mah battery1x USB data cable1x Bag

Notice: It is DIY FPV Racing Drone. You need assemble all parts by yourself. Introduction: This Kit is very easy to build , no solder work any more, just assemble then plug and play .   Very cheap but equipped with high-performance and stable components. The frame is formed by high-precision TPU 3D printing, fixed with carbon fiber board and the use of integral foam to prevent collision. Every one could enjoy the fun of building their own FPV Cinewhoop. Specification: Brand Name: Happymodel Model: Cine8 Item Name: DIY 85mm F4 3S Brushless CineWhoop FPV Racing Drone BNF Wheelbase: 85mmSize: 145x140x23mmWeight: 73g (without battery)Weight: 99g (with Insta360, NOT Included in package) EX1202.5 8000KV Motor Model: EX1202.5 Item Name: 1202.5 8000KV 2-3 Brushless Motor No.of Cells: 2-3S Lipo Configu-ration:9N12PStator Diamter:12mmStator Length:2.5mmShaft Diameter:Φ1.5mmMotor Dimension(Dia.*Len): Φ14x14.5mmWeight: 4.4g Gemfan D51 2020 4-Blade Propeller Material:PC Weight:0.91g Pitch:2in Props Dia:50.3mm Center Thickness:4.5mm Center Hole Dia:1.5mm 3 holes CRAZYBEE F4 V3.1 Flight Controller Frsky SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR (External Flysky Fli14+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR (External Speki+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR (External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Board Size: 28.5x28.5mmPower Supply: 2-4S Battery input (DC 7V-17V)Built-in Betaflight OSD(SPI Control)Built-in 5V 1A BEC Onboard 12A 4in1 ESC MCU Upgraded to EFM8BB21Power Supply: 2-4S LiPo/LiPo HV (7v/17v)Con. Current: 12A Burst Current: 15A (5 seconds)Support BLHeliSuite programmableFactory firmware: F_H_40_REV16_8.HEXDefault protocol: DSHOT600 Onboard Frsky SPI D8 Receiver Version CC2500 Hardware Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol Channels: 8chFailsafe support Diversity 2.4G receiver systemNo ground interference: above 300meter External Flysky Fli14+ Receiver Channel: 14Protocol: AFHDS-2A2.4G Mode: The second generation of an enhanced version of the automatic FM digital systemAntenna Length: 50mm  (single antenna)Input Power: 4.0-6.5V DCWeight: Only 1gSize: 19.5mm*12mm*5mmColor: BlackSignal Output: IBUSRSSI Output: Channel14No ground interference: >500m External DSMX/2 Receiver Dimension: 20x12.4x5mmSupport protocol: DSM2/DSMXOutput Signal configuration: SRXL(Set Spektrum2048/SRXL for the serial receiver provider)Antenna connector: I-PEX MHF3Antenna length: 70mmInput voltage: 3.6v~13vInput current: 100maChannels: Max12ch(usually channel 12 is used for RSSI) External TBS CRSF Nano Receiver  Original TBS CROSSFIRE Receiver, CRSF Protocol, Official TBS transmitter compatible 5.8G 40CH 400mw VTX Output power: 25mw~400mw switchableFrequency: 40CHInput voltage: 3.3V 5.5VCurrent consumption: 400mA(type)Frequency: 5.8GHz 5bands 40 channelsWith Race band  SmartAudio ready Caddx ANT 1200TVL Camera Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL  IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 14*14mm(with bracket to 19*19mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.) Lipo Battery Tattu 3S 11.4V 450mAh Lipo Battery Features: - No Solder work need and easy to build - Very reliable and resistant to drops - Stable and smooth flying - Insta360 fixed mount ready ( insta360 camera not included) - Smooth and powerful Package Included: 1x Cine8 85mm Frame 1x Optional Receiver 4x EX1202.5 8000KV Motor 2x Gemfan D51 2020 4-Blade Propeller CW 2x Gemfan D51 2020 4-Blade Propeller CCW 1x Caddx ANT 1200TVL Camera 1x 5.8G 400mW VTX 1x TypeC USB Adapter 1x Tattu 3S 11.4V 450mAh Lipo Battery

Specification: Brand name: Diatone Item name: Roma F5 Power Unit 4S / 6S 5 Inch Freestyle FPV Racing Drone Frame Wheelbase: 226mm  Camera: NO Antenna: NO VTX: NO FC: MAMBA F405DJI   ESC: MAMBA F50PRO Motor: MAMBA  TOKA 2207.5  2450KV 4S  / MAMBA  TOKA 2207.5  1700KV 6S Propeller: HQ Props S5 GPS: BN220 Weight(without battery): 320g Package Included: 1 x Roma F5 Power Unit 4S / 6S 5 Inch Freestyle FPV Racing Drone (Optinal 4/6S) 1 x HQ Props S5  1 x Injection suit 1 x Buzzer 2 x Lipo Strap1 x Universal Adjustable Gopro Mount1 x M2 Screws Pack1 x M3 Screws Pack1 x 20mm PC isolation Sheet1x 30.5mm PC isolation Sheet  

Specification: Brand Name: T-Motor Model: FT5 MKII Version: 60% Drone ( without VTX, Camera, Receiver, Lipo Battery) Wheelbase: 232mm Body Size: 205x225x45mm  Weight: 356g ( without battery) Pacer F7 Flight Controller ( Product Link) Brand: T-MOTOR Model: Pacer F7 Item Name: F7 OSD Flight Controller  Input Voltage: Support 3-6S - Enlarged solder pads on edge, easy connection. - Build-in OSD chip supports BF OSD function. - 6 x Hardware UARTs. - 3-6S lipo direct input. - Onboard 5V 3A BEC. - Support camera control function. - Build-in 128Mbit/16MByte flash for black-box function. - Built-in LC filter, filter power noise, and supply clear picture. - Direct plug with F45A 2.0, F55A Pro II，V45A，P50AP60A 4in1 ESC (T-Motor 4in1 ESC). - 5x 10V Power pad(2x Top and 3x Bottom), to power Video devices (only available when T-Motor 4-in-1 ESC w/ 10V BEC is connected). Velox 2306 Brushless Motor Brand Name: T-MotorModel: VELOX V2306Item Name: 2306 2400KV 4S / 1950KV 6S Brushless Motor Optional KV: 1950KV ( 6S Version) / 2400KV ( 4S Version)Shaft Diameter: 5mm Configu-ration: 12N14P Pacer P50A 4in1 Brushless ESC ( Product Link) Brand Name: T-Motor Model: Pacer P50A Item Name: 50A 3-6S BLheli_32 4In1 Brushless ESC Con. Current: 50A Burst Current: 60A (10S); Input Voltage: 3-6S Lipo Firmware: Tmotor_32Bit Size: 44.6x41x7mm Mounting Hole: 30.5x30.5mm M3 Weight: 20g T-MOTOR Black Bird T4943 Propeller ( Product Link) Brand: T-MOTOR Model: T4943 Item Name: 4943 4.9 Inch M5 3-Blade Propeller Color: Gray/Red/Blue/Orange ( Optional) Quantity: 2 CW & 2 CCW Size: 4.9" Pitch: 4.3" Blades: 3 Mounting Hole: M5Weight: 3.5g NO VTX  NO Camera NOT Include VTX  and Camera in pacakge. Recommend Use with DJI Air Unit DJI Air Unit Link NO Lipo Battery NOT Include VTX  and Camera in pacakge. For 4S Version, recommend use with 4S 1300-1550mAh Lipo Battery XT60 Plug For 6S Version, Recommend use with 6S 1000-1500mAh Lipo Battery XT60 Plug Package Included: 1x T-Motor FT5 MKII FPV Drone ( 60% Drone Version)

Description: Brand: AuroraRC Item Name: MAMFU24 Wheelbase: 153mm Size: 255x190x55mm Weight: 327g (Without battery) Flight Controller: F722 DUAL BT Bluetooth FC ESC: BLHELI_S 40A 4in1 ESC VTX: RUSH TANK 800mw 5.8GHz VTX Motor: MAMBA 1606 Brushless Motor KV2700 Propeller: Gemfan D76 5-bladed Prop Support: sbus/ibus/dsmx receiver GPS antenna position The installation position of GPS antenna is reserved, and GPS can be added by itself Camera: CADDX Retal Starlight Camera Image Sensor: 1/1.8" Inch Starlight HDR Sensor Horizontal Resolution: 1200TVL TV System: NTSC&PAL (Changeable) Image:16:9 &4:3 WDR: Super WDR (HDR) Min.Illumination: Starlight    LENS:1.66mm,2.1mm Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC:1/60~100,000 S/N Ratio: ＞60dB (AGC OFF) Video Output: CVBS Camera OSD:Sepatate OSD Dimensions:19*19*19mm Wide Power Input: DC 5-40V Weight: 8g(N,W)/40.5g(G.W) Package Included: 1* AuroraRC MAMFU24 RC Drone

BETAFPV New Beta95X V3 Analog F4 AIO 20A Toothpick FC V4 3800KV 25-250mW 5.8G VTX 450mAh 4S for FPV Racing Whoop Drone Quadcopter Note: Batteries and SMO 4K Camera are not included in the package. if you want more 450mAh 4S battery and SMO 4K camera,you can order separately or contact us for more detail information,thanks Beta95X V3 Analog Whoop QuadcopterWe're thrilled to announce that the Beta95X V3 pusher whoop drone is officially released! As the upgrade version of Beta95X V2, it has a brand new pusher design and more powerful configuration, bringing pilots a smoother flying experience! What's more, with the built-in mount for the SMO 4K and a low center of gravity "pusher-style" inverted frame, Beta95X V3 Whoop Quadcopter perfectly matches for SMO 4K camera, and gives the pilots an incredibly stable and clear 4K footage video while in the FPV flight!DJI FPV goggles can be used on Beta95X V3 HD Digital VTX. Except that, we also release the SMO 4K camera. Bullet Point1.Come with a built-in mount for the SMO 4K action camera for easy out-of-the-box installation, Beta95X V3 is perfectly suitable for the SMO 4K action camera. Meanwhile, the drone offers a power cable for SMO 4K, more convenient for power input.2.Beta95X V3 Whoop Quadcopter maintains a low center of gravity and easier to maneuver. Combining with SMO 4K, pilots can get a stable & high-quality video while in FPV flight. 3.Adopts a brand-new innovative pusher frame design, Beta95X V3 is more durable and easier for installation than Beta95X V2. Meanwhile, the newly designed pusher whoop frame also comes with an EVA foam cushioning design to give you more safety flying.4.Equipped with F4 AIO 20A Toothpick FC V4, 1106 3800KV motor, and D63 5-blade props, this highly efficient power system keeps Beta95X V3 more powerful and less noise in flight. For the battery, we highly recommend you using BETAFPV 450mAh 4S battery to get the best flying experience.5.Centering the drone's gravity by reversed-motor design and top battery place makes the drone more maneuverable to achieve all FPV freestyle tricks such as diving. 6.Further improves the shock mitigation system to eliminate the shake of the camera, Beta95X V3 will make the camera more stable on the flight, which ensures pilots can capture all the beautiful moments of flight with the stabilized and clear video.Specification:Item: Beta95X V3 Whoop QuadcopterWeight: 99.1g (without battery)Wheelbase: 95mmFC: F4 AIO 20A Toothpick FC V4Frame: Beta95X V3 Frame KitMotors: 1106 3800KV Brushless MotorProps: Gemfan D63 5-Blades PropsReceiver Option: Frsky FCC/Frsky LBT/TBS/PNP Camera: EOS CameraFPV Camera Degree: 25°- 45° VTX: M02 25-250mW 5.8G VTXCamera Mount: SMO 4K camera MountHD Camera Mount Degree: 5°- 45° Antenna: Air 5.8GHz Antenna (RHCP)Battery: 450mAh 4S battery(Not including) Charge Connector: XT30Flight time: About 4.5 min flight with 450mAh 4S batteryBETAFPV SMO 4K Camera (Not including)SMO 4K camera, a high-degree lightweight action camera for FPV drones that is developed by BETAFPV & Insta360. SMO 4K camera only weighs 30g and perfectly fit for FPV drones, and brings pilots an extraordinary flying experience and a strong visual impact. What's more, it almost compatible with all kinds of FPV drones like micro cinewhoop Beta95X V3, 3-4in the ducted quad, 4-5in long-range FPV drone, and FPV fixed-wing. It will be the perfect action camera for pilots in search of high-quality video with FPV racing drones.  Note: SMO 4K Camera is not included in package, you can order separately, click hereBeta95X V3 Pusher FrameThe newly designed pusher whoop frame - Beta95X V3 Frame not only puts all the cameras and batteries on the top of the platform, makes the center of gravity is right in the middle of the drone, brings the best fly operability but also gives Beta95X V3 high durability, easy installation and a concise appearance. Compared with the Beta95X V2 pusher kit, the V3 frame is made of high-quality PA12 material, bringing more durable flight and no fear of damage. Meanwhile, it also comes with an EVA foam cushioning design to give you more safety flying.Camera & VTXCustomized EOSV2 micro FPV camera is also provided on Beta95X V3 Whoop Quadcopter, brings a high-quality video and low RF interference. In addition, M02 25-350mW VTX is a high-quality 5.8GHz VTX including 25mW, 100mW, 200mW and 350mW. With 350mW output power, pilots can fly drones up to 600 meters away to explore more possibilities and fun. FC & ESCBeta95X V3 series whoop drone is equipped with the new released F4 20A AIO toothpick brushless FC, it extremely reduces the weight while improving the ability of the ESC to continuous current 20A, and brings pilots more power to fly the Beta95X V3 quad! Meanwhile, the new 20A FC V4 adds 2 pin connector ports for DJI Digital VTX and Rx, just plug & play, less solder work needed, super easy to install.Motor & PropsGemfan D63 5-Blades Props is designed for the inverted installation, and it brings pilots a smooth flight! Meanwhile, compared with D63 3-blades propellers, D63 5-blade props are more durable and more powerful, offers pilots a high-efficiency flight experience. Equipped with the 1106 3800KV Brushless Motor, it brings a stronger power and lower noise, which will give pilots an unprecedented flying experience.The Beta95X V3 Whoop Quadcopter also comes with "props out" by default. Why we need "Props out" direction?Default Betaflight props direction, quadcopter dips, and "washes out" in hard corners. With reversed props or "props out", no more dipping even in the hardest cornering. FAQHow to power the Naked GoPro on Beta95X V3 or Beta95X V3 HD Digital VTX.One adapter 3P GH1.25 power cable for Customized Naked Camera is offered in the package, pilots can use it to power the Naked Camera.Package Included:1 * Beta95X V3 Whoop Quadcopter-Analog1 * Gemfan D63 5-blades Propellers(2CW+2CCW)1 * 20mm FPV Camera Mount1 * Spare EVA Foam Tape1 * USB Adapter Board for FC1 * Adopter Cable for Customized Naked Camera

It only weights 66.6g! Beta85X HD Digital VTX perfectly meets the optimal ratio between weight and power.  With the special modified Nebula Nano Kit, the total weight of the drone is significantly reduced and flight  experience improved a lot. Pilots can easily achieve almost all kinds of FPV freestyle tricks with HD footage.  If you want to enjoy a brand-new flying experience with HD digital VTX whoop, this Beta85X HD digital VTX ultralight 3S drone will be your best choice. Description: Beta85X HD Weight 66.6g(w/o Battery) Beta85X Frame Wheelbase: 85mm Material: Clear plastic Motor mounting hole: for 110x motors ( such as 1105 6000KV motors ) FC mounting hole: fully compatible with whoop style FC board mounting pattern, 26mm x 26mm LED Holder Available Weight: 10g Beta F4 2-4S AIO F4 AIO Weight: 5.07g FC:  CPU: STM32F411CEU6 (100MHZ )Six-Axis: MPU6000 (SPI connection) Size: 26mm x 26mm, whoop mounting patternFirmware version: BETAFPVF411 (BEFH)OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and BETAFPV Micro DSMX Receiver (Don't support DSMX RX with 3.3V solder pad ) since V1.2.Support programmable LED like WS2812 etcBuilt-in current sensor ESC: Support BLheli/BLHELI_S suite Pass-through readySupport PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600Input voltage: 2S-4S LipoContinue current: 12APeak current: 13AFirmware: BLHELI_SProcessor: SILABS EFM8BB21F16GMotor Connectors: 1.25mm header pins connectorFactory firmware: G-H-30-16.7 Beta 1103 Motor Height: 14mmShaft: φ1.5mmMotor Mount Holes: M1.6 on Dia 8.5mmKV (rpm/V): 8000 Plug: Micro JST-1.25 3-pins connector Gemfan 2020 4-Blade Propellers 1.5mm Shaft Weight: 0.93gBlades: 4Material: PCProp Disk Diameter: 50.3mmCenter Thickness: 4.5mmShaft Hole: 1.5mm Receiver Option  Frsky XM+ / TBS Crossfire Camera& VTX Camera Degree: 25°-45°HD digital camera & VTX: Modified Caddx Nebula Nano Kit Equipped with a modified Nebula Nano HD Kit, it further loses the weight of the drone,  which only weighs 14.2g, brings the Digital FPV more possibility to achieve different kin -ds of freestyle tricks. This kit also can support with DJI goggles. With DJI goggles, it can provide 720p/60fps digital high-definition picture and a transmission range up to 4km. Users can choose 25mW/200mW/500mW/700mW from DJI goggle settings.  Air 5.8GHz Antenna (LHCP) Connector: IPEXPolarizability: LHCPGain: 2.2DbiColor: BlueWeight: 1.1g (1 pc)Dimensions: 10.3mm*50mmCenter Frequency: 5.8GHzBandwidth: 500 MHz (5.5 – 6.0GHz)Cable：RG1.37  Recommend 3S 450mAh battery (Not including)  Capacity: 450mAhVoltage: 11.1VDischarge Rate: 75CMax Burst Discharge Rate:150CConnector: XT30Size: 61*15*18mmFlighttime: 4 min 30 sec on Beta85X (smooth flight in a windless environment)Weight: 44g Package Included: 1 x Beta85X Whoop Quadcopter (HD Digital VTX)1 x Gemfan 2020 4-blades Propellers (2CW+2CCW)

Fus-x111 V2 is a 2.5-inch culvert aircraft designed for small and medium-sized flight environment. At present, there are analog version and DJI Vista version. X111 V2 analog version is only 127g, and x111 v2-dji Vista version is only 150g. Its ultra light weight makes it has strong mounting capacity and can carry most of the motion cameras on the market, such as Go~Pro, insta, DJI action, etc. The flight control hole position of fus-x111 V2 is 2.5.5/20 mm standard hole position, players can add card recording equipment according to their own needs; V2 increases the installation position of 915 antenna, adds anti-skid battery stickers, and replaces high-quality RGB LED tail lights to make formation flying more recognizable. Fus-x111 V2 is suitable for both novices and veterans. It is more friendly to novices under 3S battery and can fly gently; x111 V2 under 4S voltage is faster, more flexible and more violent. Our recommended Battery Specification: 3S (12.6V) 450mah-800mah 4S (16.8v) 450mah-650mah. It is recommended to use a lighter battery when there is no load. It will make the hand feel better. The structure design of x111 V2 makes it still has high body strength in the case of hollow out and weight reduction. The duct ring of injection molded PC and the shock absorption sponge of EVA make it have good safety collision performance and are not afraid of indoor flight. Description: Brand: FUS Item Name: X111 V2 Wheelbase：111mm Weight：127g Camera：Runcam nano 2 Frame：FUS-X111 V2 Fcs：FUS-F411 AIO Esc：FUS-25A AIO Motor：FUS-1106 3800KV Video transmission：FUS-E200 200mw Propeller：GEMFAN 2540-3 Bladed Size: 155mm*173mm*40mm Material：Carbon fiber PC EVA TPU RGB LED  Version: PNP Without Receiver Package Included: 1* X111 V2-PNP 4* 2540 Propeller 2* 2.4g Antenna tabe 1* Battery cable tie 1* Battery antiskid stick 8* M2*8 hexagon socket screw 1* Instruction book

Specification: Brand: DIATONE Item name: Taycan 25 DUCT 2.5 Inch Cinewhoop FPV Racing Drone PNP Take Off Weight: 320g                                                     Camera CADDX BABY RATEL 1.8mm        VISTA DJI  Antenna FOXEER Lolipop FOXEER Lolipop VTX MAMBA TX400 400mW MAMBA TX400 400mW FC/ESC MAMBA F411 25A AIO MAMBA F411 25A AIO Motor MAMBA Racing 1404 5000KV MAMBA Racing 1404 5000KV Weight 150g 177g 4S 1300 mah （Flight time：5-7min） - Making Stable Film 4S 750-1050 mah  （Flight time：3-5min） - More fast Flight Package Included: 1 X  DIATONE Taycan 25 DUCT 2.5 Inch Cinewhoop FPV Racing Drone PNP 1 x Camera (Optional) 4 X GEMFAN Squirt Props 63mm Propeller 1 X 1404 5000KV Motor 1 X Frame Bottom Part  1 X 1.2*16cm Lipo Strap 1 X 1.2*21cm Lipo Strap 4 X M2*3 Screw 4 X M2*4  Screw 4 X M2*5 Screw 4 X M2*6  Screw 14 X M2*7  Screw 4 X M2*8  Screw 4 X M2*9  Screw

Explorer LR quad is the masterpiece of the collaboration between Flywoo and #micro long range original creator Dave_C .  #Micro long range is a brand new field, and we will explore more fun in this field with Dave_C in the future. For me personally, Long Range cruising through epic landscapes is the best thing about FPV! But unfortunately, it was always kind of difficult to practice legally and without bothering people with all the noise a massive 6 or 7" long range quad produces. So the basic idea behind the original Project #MicroLongRange was born: Scale down a 7" long range quad until it is below 250g take off weight. With the support of an awesome community on Facebook and Instagram as well as a massive development effort by Flywoo, this concept has seen a lot of improvements that are now all implemented in the Explorer LR! This tiny quad is equipped with GPS, Crossfire and an independent model finder to give you the necessary confidence to push it to the maximum range of digital and analogue video transmission. The powertrain with it's GOKU 16x16 stack and the all new 2700kV 1404 motors spinning 4" props is optimized for maximum efficiency and low weight: Flight times of way over ten minutes on a regular 850mah 4S LiPo battery are easily achievable! Cruising speeds of 40-50 kph (25-30mph) are astonishingly high for such a small quad and have allowed me to do 10km (6 mile) round trips easily. And the best thing about it: It's incredibly quiet! You nearly cannot hear it flying by as soon as you are a few dozen meters away. ”                                                                                                                                                      ----- Dave_C FPV  Specification: Brand Name: Flywoo Model: Explorer LR Caddx Ant 600mw VTX Version Item Name: 4 Inch F4 OSD Long Range FPV Drone Weight: 246g  Flight Time: 15-16 mins English Manual GOKU F411 Micro Stack - F4 OSD Flight Controller Brand Name: Flywoo Model: GOKU F411 FCMCU: STM32F411IMU: MPU6000 gyro/accelerometer (SPI)OSD: BetaFlight OSD w/ AT7456E chipBaro: noblack box: 8MLED：8*WS2812BEC Output: 5V@2AIntegrated LC FilterFirmware target: FLYWOOF411Size: 24×24mm board,16mm mounting holes (M3)Weight: 2.6g GOKU BS13A ESC Brand Name: Flywoo Model: GOKU BS13A ESCESC MCU: BB21F16GContinuous current: 13AInput:2-4s lipoSupports Dshot600 ,Oneshot,MultishotSize: 24×24mm board,16mm mounting holes (M3)Weight: 2.6g GOKU HM600 VTX 600MW Frequency: 5.8GHz 5 bands 37 channels Raceband: 5362-5945 MHZ Power: PIT/25/50/100/200/600mW switchable Control Mode:IRC(RX)/Button BAT: +7-28V Input Video System: NTSC/PAL Antenna: IPX Size: 30.5mm×3.5mm×3mm Weight: 3 g NIN 1404 V2 2750KV Motor Brand Name: FLYWOOModel: NIN 1404Item Name: 1404 2750KV 4-6S Brushless MotorColor: TitaniumInput Voltage: 4-6SStator diameter: 14mmStator height: 4mmKV: 2750KVShaft size: M1.5 Gemfan 4024 Propeller Brand Name: Gemfan Item Name: 4024 4x2.4 4 Inch Propeller Quantity: 2 CW & 2 CCW Recommend Lipo Battery ( NOT Included) Recommend 4S 650-1300mAh Lipo XT30 Plug Feature: 1.The lightweight 4-inch quad below 250g even if you connect with the battery, meet the current requested of FAA rules. Easy to control and long flight time, we strongly recommend to FPV beginners and pilots who like to cruise! 2.Equipped with GOKU 16X16 MICRO STACK, and NIN 1404 v2-2750kv, support 4s battery. You can get up to 20 minutes for cruising! So this is a quad that is very suitable for FPV beginners and long range enthusiasts! 3.We recommend installing side carbon fiber plate to increase the strength and stability of the Arm. Flywoo Finder v1.0 how to work？ 1 Flywoo Finder v1.0 can power itself to beep and LED light to flash even the quad battery has been ejected. 2 Fingder v1.0 can work for 4-5 hours. 3 Press the button for 3 seconds to close it Flywoo Goku Gps Mini V1.0  rescue function how to work  ? 1. Before disarm, GPS must search for more than 5 satellites to lock the home position. 2. After disarm, observe the OSD data during the flight, and the rescue function can work normally only if the distance exceeds 100 m. Otherwise, the quad will crash. 3. If the remote control suddenly loses signal, the GPS rescue function will work automatically and return to the home position. (Set the AUX of GPS rescue mode in betaflight Failsafe, the default is AUX3 2000) Flywoo  ATOMIC 5.8G antenna customized for Explorer LR ! Of course it is also suitable for any other FPV drones! Package Included: 1* Prebuilt and tested Explorer LR Drone  1* Side carbon plate 1 set 1* Spare srew 2*Gemfan 4024 4pcs 

Beta85 Pro 2, a new approach to the 2S micro formula which optimizes weight. This provides a smoother flight experience that's easier to control at high speed and easier on battery life as well. With an F4 2S AIO FC and 1103 11000Kv motors lifting only 42g plus battery, you have plenty of power to use both indoor and outdoor spaces as a small scale acro playground. The weight savings also provide a handling advantage on the race course, allowing tighter turns and making it easier to hit gates.  BETAFPV always tailor a new FPV combine to meet every FPV pilots' requirement. Pro 2 series is our product line with lighter, faster and higher integrated brushless drones. So now we have 3 versions for your choice in Pro 2 series- Beta65 Pro2, Beta75 Pro2, Beta85 Pro2. Inspired by Justin Davis & Nate Payne's ShutterBug85, this build is dramatically reduced weight and optimized the flight experience, and the acro performance is really awesome. Beta85 Pro 2 is the best combine for pilots, you do not need to assemble it by hand but also get more power on punch for acro mode. Bullet Point: Beta85 Pro 2 starts a new era of 2S whoop, which could fly real acro, like a larger quad, but is still safe enough, light enough, and durable enough to fly anywhere, especially suitable for racing. With the high-performance STM32F411CEU6 processor FC boards and tuned betaflight_matekf411rx_4.0.0(Development Version), everyone could fly the Beta85 Pro 2 drone like a racing pro. With durable and light enough frame. Total weight of 42g gives pilots a good balance of weight and nice punch on 2S battery. Whole drone no soldering or tinkering necessary. Customized lightest 1103 11000KV motors with cable connectors. Just plug and play. 300mAh 2S high rate battery is recommended by default. The drone comes with XT30 cable, convenient for intalling the 2S battery. But pilots could also use their whoop batteries with a replaced power cable. Optional and affordable. Specification: Weight: 42g (without battery) FC：F4 2S AIO FC (with XT30 cable) Motors: 1103 11000KV with connector Props: EMAX Avan 2'' 4-Blade Propellers (1.5mm Shaft) Camera&VTX: A01 AIO Camera 5.8G VTX Frame: Beta85 Pro2 Frame Canopy: Canopy for micro cam/ Canopy for Tiny Whoop Drone Receiver Option: SPI Frsky XM+(FCC )/ SPI Frsky XM+ (LBT) /TBS Crossfire Battery: 300mah 2S Battery Flight time: 2 minutes and a half with 300mAh 2S battery (smooth flight in a windless environment) FC & ESC SPECIFICATIONS 2S AIO F4 FC It is suitable for a lighter 1-2S whoop drone perfectly, like Beta65 Pro 2or Beta75 Pro 2 etc. It integrated with a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver and 1-2S 5A ESC. So the 1-2S drone could save much weight for a faster fly experience. A01 AIO Camera 5.8G VTX The A01 AIO Camera combo is perfect for Pro2 Series whoop drone, which is integrated with A01 VTX, 5.8GHz FPV Transmitter, 600TVL FPV Camera and Dipole Whip Antenna. Props Out The Beta85 Pro 2 drone comes with "props out" in default. Why we need "props out" direction? Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering. FAQ 1. Does this drone have current sensor? This drone does NOT have a real current sensor. We use the virtual current meter in Betaflight. When properly calibrated, it can be accurate enough to be useful. Here is the pre-calibrated value out of the box. set current_meter = VIRTUAL set ibatv_scale = 90 set ibatv_offset = 29 2. Binding procedure of F4 2S AIO (SPI Frsky RX) is given in our support page. 3. Cli Dump for different versions of the 2S Whoop are provided in our support page. 4. The camera angle is 35 degree by default but a spare camera mount with 25 degree is also attached to the drone. 5. If you are using EU-LBT firmware radio controller, you might find that you can't bind successfully to this SPI Frsky receiver. Here are the solutions we provide for you.  6. If your Beta85 Pro 2 (SPI Frsky Receiver) shuts down and falls down randomly, please read this article in the support page. 7. How to set up smart audio vtx control? (Multirotor Guide gives you the most straightforward explanation) Package Included: 1 * Beta85 Pro 2 Whoop Quadcopter (2S) 1 * EMAX Avan 2'' 4-Blade Propellers (1.5mm Shaft)  

Summary: The most distinguished 4 inch Micro Long Range quadcopter, With superb light-weight design frame and more than 28 Minutes flight time, GEPRC Crocodile Baby 4inch is launching right now , It was just a complete out-of-body experience. There are three versions: DJI HD VTX, Analog VTX 5.8G 600MW and 4K HD recording camera version. Pilots can choose whichever based on their likings. Crocodile Baby 4 inch is the lightest 4-inch Micro Long Range FPV at present. The minimum takeoff weight is within 250g, which conforms to FAA rules. If you are looking for a FPV that can fly around 30 minutes, Crocodile Baby 4 inch is powerful and flexible flight.it will satisfy all your needsCrocodile Baby 4 inch is the preferred choice for Micro Long Range flight. The High efficiency power system, New Produced GEPRC 1404 2750kv motor and Gemfan 4042 propeller, Using the latest GEP-20A-F4 AIO flight control system, and combine with DJI HD picture transmission system, It is very stable flight and providing a feeling of “easy control” that inspires confidence, especially among novice.In the hands of a skilled pilots, the Crocodile Baby can bring extreme awesome experience as well. Extensive testing ensures that frame and system hold up in any environment, It can work well and get better flight efficiency. If equipped with GEPRC Lion VTC6 3000mAh battery, flight time is more than 28 minutes. Crocodile Baby 4 inch independently designed GPS module, added GPS function. When signal losing or VTX out of control,It can be start the rescue mode of betaflight (in emergency,The FPV fly back to the approximate position of the base,If the signal is get again,Be sure to operate the FPV to landing manually.) ,The Rescue mode won’t landing automatically. Crocodile baby integrates GEPRC Finder. If the FPV lost and disconnects the battery power, the beeper of GEPRC Finder will making the sound constantly. Crocodile Baby 4 inch is assembled and debugged by GEPRC TEAM,Improved performance and the flight performance of the whole FPV always superior in Micro Long Range FPV flight. Specifications: Brand: GEPRC Model: Crocodile Baby 4″ HD Frame: GEP-CB4 Wheelbase: 174mm The thickness of the top plate: 1.5mm The thickness of the bottom plate: 2.0mm The thickness of the arms plate: 2.5mm Flight Controller System：GEP-20A-F4 MCU: STM32F411 IMU: MPU6000(SPI) Type-C USB interface OSD: BetaFlight OSD w/ AT7456E chip Integrated LC Filter Firmware target: GEPRCF411 Power input: 4S LiPo VTX: CADDX VISTA HD Props: Gemfan 4042 Antenna: GEPRC Momoda 5.8g LHCP Motors: GR1404 2750KV GPS: BN-228 Drone weight: 160.4g Crocodile Baby 4″ HD Take Off Weight: 242.4g (Include 4S 750mAh battery) Receiver: PNP(with DJI Receiver) / Frsky XM+/ Frsky R9mm /TBS Nano RX Motors & Batteries Recommended: Motors:GR1404 2750KV Battery:4S 650mAh – 1300mAh Lipo or 6S Lion 3000mAh (Not Included) Package Included: 1 x Crocodile Baby 4″ HD DJI FPV Racing Drone 4 x Gemfan 4042 Props(pairs) 2 x The Silicone Pad 3 x L-shaped Screwdriver 1 x Antenna Protection Tube 1 x Spare Front Arms 1 x Spare Rear Arms 2 x 12*180mm Battery Strap 1 x 15*200mm Battery Strap

Diatone Roma L3 4S/6S LR Micro Long Range FPV Racing Drone PNP/BNF RUNCAM NANO2 MAMBA F411 AIO 25A Blheli_S ESC 1206 3600KV Motor Specification: Brand name: Diatone Frame Wheelbase: 146mmCamera: RUN CAM NANO2Antenna: MAMBA Ultras RHCPVTX: MAMBA TX400FC: MAMBA F411 AIOESC: MAMBA 25A 8BITMotor: MAMBA 1206 3600KV Receiver: MAMBA MSR D16 (ONLY BNF version) Propeller: 1 set HQ T3×2.5×3  Propeller and 1 set HQ T3×1.8×3  PropellerWeight ：110g Package Included: 1 x Roma L3 FPV Racing Drone 1 x Buzzer3 X Strap1 X M2 Screws Pack1 X 20mm PC isolation Pcs1 x Universale Mount for GoproGPS Top Lipo strap MOunt:22×20mm

PRODUCT DESCRIPTION Having one of the most successful FPV companies link up with the global drone market leader, combining DJI's digital FPV system with our highest standards racing, freestyle and cinematic drones to create a HD pilot experience! The Cidora SL5 V2.1 HD w/ DJI Air Unit BNF features the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This frame offers a squashed X layout for maximum control, equipped SucceX-D F7(50A 4-in-1 ESC) stack and popular XING motors. Everything you just need to bind and fly! Different power version (4S and 6S available) to fit most pilots requirements. Choose your receiver option to get your FrySky or Crossfire installed and ready to be bound to your radio. Main Changelog V2.1: 1. LED illuminated Logo 2. Bottom carbon thickness increased from 2mm to 2.5mm 3. The Wheelbase increased from 215mm to 217mm 4. TPU parts are not compatible, color is different  Features: 1. Everything you need to bind and fly! 2. Optimized weight distribution: DJI unit and Stack centered 3. Equipped with SucceX-D F7(SucceX 50A BLHeli32 4-in-1 ESC) Stack 4. Equipped with the DJI FPV Air Unit -Bind and Fly 5. Buttery-smooth 720p 120fps FPV feed 6. Pre-tuned with smooth freestyle settings 7. Full 3K Carbon Fiber airframe with chamfered arms 8. Equipped with XING 2207 motors 9. Weight: 445.4g without battery and camera mount for Gopro 10. LED illuminated Logo 11. New pink version frame Specification: Brand: iFlight Item Name: Cidora SL5 V2.1 HD 4S BNF FPV Racing Drone Total Dimensions: 166*139mm (body dimension) Frame Wheelbase: 217mm Bottom to top distance: 28mm Arm thickness: 5.5mm Bottom plate thickness: 2.5mm Top plate thickness: 2mm Upper(middle) plate thickness: 3mm Camera plate thickness: 2.5mm (included TPU inserts) SucceX-D F7 TwinG V2.1 FC SucceX 50A 2-6s BLHeli32 4-in-1 ESC Dshot1200 XING 2207 2450KV(4S) Nazgul 5140 Propellers Weight: 445.4g (without battery and camera mount for Gopro) SucceX-D F7 V2.1 TwinG Flight Controller: MCU: 216MHz STM32F722 Gyro: 2x ICM20689 Baro: YES Blackbox: 32MB Betaflight OSD: YES BEC: 5V 2.5A / 9V 2.5A Current sensor scale:  100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad: Yes RSSI input pad: No UARTs: 5 Motor outputs: 8 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5) 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V) BLHeli_32 Telemetry: RX5 Input voltage: recommended 2-6S, MAX 8S Firmware Target:  IFLIGHT_F722_TWING Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm Dimensions: 36*36mm Weight: 7.5g USB type-C SucceX 50A 2-6S BLHeli32 4-in-1 ESC Dimension: 43*39mm Mounting Holes: 30.5*30.5mm/Φ3mm Weight:14.4g Volts input: 2-6S STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware Current sensor: Yes Telemetry：Supported BEC: No Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc. Target: iFlight-BL32-4IN1 BLHeliSuite download: BL32 Package Included: 1 x Cidora SL5 V2.1 4S FPV Drone - BNF 1 x DJI FPV Camera 1 x DJI FPV Air Unit Module 2 x DJI LHCP RP-SMA 5.8g FPV antenna 2 sets x Nazgul 5140 propellers  (Set of 4 - Color may vary) 1 x 20*250mm battery strap  (Color May Vary) 1 x 20*200mm battery strap  (Color May Vary) 1 x for GoPro TPU bottom stand incl. lock screw NOTE: The camera for GoPro9 and TPU camera mount do not include. Recommend Parts (Not included): 1. TPU 3D Printed Camera Mount for Gopro Hero 5/6/7/8/9 with ND8 Filter 2. TPU 3D Printed Camera Mount for GoPro Session (LINK) 3. Battery: 4S 1300mAh to 2000mAh / 6S 1050mAh to 1500mAh  PRE-TUNED & PRE-SETUP: - Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience! To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps" - Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check our linked article on "How to disable Angle-Mode, activate Acr0-Mode"

Introduction: Having one of the most successful FPV companies link up with the global drone market leader, combining DJI's digital FPV system with our highest standards racing, freestyle and cinematic drones to create a HD pilot experience! The Cidora SL5 V2.1 HD w/ DJI Air Unit BNF features the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This frame offers a squashed X layout for maximum control, equipped SucceX-D F7(50A 4-in-1 ESC) stack and popular XING motors. Everything you just need to bind and fly! Different power version (4S and 6S available) to fit most pilots requirements. Choose your receiver option to get your FrySky or Crossfire installed and ready to be bound to your radio. Main Changelog V2.1: 1. LED illuminated Logo 2. Bottom carbon thickness increased from 2mm to 2.5mm 3. The Wheelbase increased from 215mm to 217mm 4. TPU parts are not compatible, color is different  Features: 1. Everything you need to bind and fly! 2. Optimized weight distribution: DJI unit and Stack centered. 3. Equipped with SucceX-D F7(SucceX 50A BLHeli32 4-in-1 ESC) Stack. 4. Equipped with the DJI FPV Air Unit -Bind and Fly. 5. Buttery-smooth 720p 120fps FPV feed. 6. Pre-tuned with smooth freestyle settings. 7. Full 3K Carbon Fiber airframe with chamfered arms. 8. Equipped with XING 2207 motors. 9. Weight: 445.4g without battery and Camera mount. 10. LED illuminated Logo. 11. New pink appearance version. Specification: 217mm Frame Kit Wheelbase: 217mm Material: Full 3K Carbon Fiber Arm Thickness: 5.5mm Bottom Plate Thickness: 2.5mm Top Plate Thickness: 2.5mm Middle Plate Thickness: 3mm Camera Mount Plate Thickness: 2.5mm (included TPU inserts) Bottom to top distance: 28mm Dimension: 166x139mm (body dimension) Color: Pink & Black SucceX-D F7 TwinG V2.1 Flight Controller ( Product Link) Input Voltage: 2-6S, Max. 8S Firmware Target:   IFLIGHT_F722_TWING MCU: 216MHz STM32F722 Gyroscope: 2x ICM20689 Barometer: YES Blackbox：32MB Betaflight OSD: YES BEC: 5V 2.5A & 9V 2.5A Current sensor scale:  100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad : Yes RSSI input pad: No urrent sensor scale:  100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad: Yes RSSI input pad: No UARTs: 5 - Motor outputs: 8 - 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5) - 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V) - BLHeli32 Telemetry: RX5 Dimensions: 36x36mm ; Mounting Hole: 30.5x30.5mm φ4mm with Grommets φ3mm Weight: 7.5g USB type-C SucceX 50A 2-6S BLHeli_32 4in1 ESC Input Voltage: 2-6S Lipo STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware Current sensor: Yes Telemetry：Supported BEC: No Dimension: 43x39mm ( Mounting Holes: 30.5x30.5mm/Φ3mm) Weight:14.4g Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc. Target: iFlight-BL32-4IN1 BLHeliSuite download (BL32): Link XING 2207 1800KV 6S Motor ( Product Link) Configu-ration: 12N14P Stator Diamter: 22mm Stator Length: 7mm Shaft Diameter: 5mm Nazgul 5140 3-Blade Propeller Item Name: 5140 Durable 3-Blades Propeller Quantity: 2 CW & 2 CCW Color: may vary DJI Air Unit DESCRIPTION Weight : Air Unit (Camera included): 45.8 g / 3.9 g (MMCX elbow each) Dimensions Air Unit: 44 x 37.8 x 14.4 mm Camera: 27.4 x 21.1 x 20.1 mm Coaxial Cable: 100 mm SPECIFICATION Operating Frequency: 5.725-5.850 GHz Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km Video Format: MP4 (Video format: H.264; Audio format: ACC-LC) Input Power: 7.4-17.6 V, about 4-9 W Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M Lens: 2.1 mm, f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150°(D); 122°(H); 93°(V) Dimension: 22.1 x 21.1 x 20.1 mm Weight: 8.2 g Recommend Parts (Not included): 1. TPU 3D Printed Camera Mount for Hero 5/6/7/8/9 with ND8 Filter  2. TPU 3D Printed Camera Mount for Session (LINK) Recommend Lipo Battery ( NOT Included):  6S 1300mAh 120C Lipo Battery XT60 Plug Package Included: 1 x Cidora SL5 V2.1 6S FPV Drone BNF-Pink 1 x DJI FPV Camera 1 x DJI FPV Air Unit Module 2 x DJI LHCP RP-SMA 5.8g FPV Antenna 2 sets x Nazgul 5140 Propellers (Set of 4 - Color may vary) 1 x 20*250mm Battery Strap (Color May Vary) 1x 20*200mm Battery Strap  (Color May Vary) 1x TPU bottom stand incl. lock screw

Specification: Brand:HOMFPV  Item Name: Micron 2 Inch HD  Wheelbase: 95mm FC AIO: F4 AIO 20A Motor: 1104 6500KV Brushless Motor Propeller: Gemfan 2036 Antenna: LHCP 5.8Ghz Camera: Caddx Nebula Battery(No Included): 3S 850mAh PNP HD Weight:  Motor Mode: 1104 KV options: KV6500 Configu-ration:9N12P Stator Diamter:11mm Stator Length:4mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ15.4mm*13.7mm Weight(g):6g AIO FC ESC ESC:Power supply: 2-4S LiPo(7v-17v) FC MCU: STM32F411CEU6 FC sensor: MPU-6000(SPI connection) ESC MCU: EFM8BB21 Current: BLHeli_S 4IN1 ESC, 10A each continuous, peak 20A（5 seconds） Build-in OSD  Build-in Current meter Build-in 5V 3A BEC Build-in LED light(RGB) Board size: 55x43mm Support: BLHeliSuite programmable Factory firmware: J_H_50  Caddx Nebual Nano Camera Image Sensor: 1/3inch CMOS sensor Resolution: 720p/60fps TV System: NTSC & PAL  (changeable) IMAGE  16:9  Lens 2.1 mm, f/2.1 FOV: FOV: 150°(D); 122°(H); 93°(V) Shutter: Rolling shutter Dimensions: 14*14*21mm Wide Power Input: DC 4-36V Weight: 4.5g (N.W.) Features: 1. Modular disassembly design, easy to maintain and replace parts 2. Rear USB interface for easy plug-in 3. 6-8 Mins flight time using TATTU 850 mAh 3S battery. 4. Built-in RGB LED, can indicate battery power Green-Yellow-Red 6. Compatible with receiver Futaba/CRSF/Frsky/Spektrum/Flysky Package Included: 1 X HOMFPV Micron 2 Inch HD FPV Racing Drone 4 x Gemfan 2036 CW 4 x Gemfan 2036 CCW 1 x Battery Strap 2 x EVA Sponge 1 x Type-C Cable 1 x Manual 1 x  Sticker 1 x Naked Holder for Gopro 1 x Insta360 Go Holder

Specification: Brand Name: Betafpv Model: X-Knight 4 Item Name: 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone X-Knight 4 160mm Frame Kit Material: T700 Carbon FiberWheelbase: 160mmWeight:  24.43g,Frame Height: 8mmTop plate thickness: 1.5mmBottom plate thickness: 1.5mmArm thickness: 4mmBattery protected plate thickness: 1.5mm F4 Flight Controller AIO 20A ESC Board Model: 20A Toothpick AIO FC V3 CPU: STM32F411CEU6 (100MHZ) Six-Axis: MPU6000 (SPI connection) Size: 32.5*32.5mm (26.5mm mounting holes) Firmware version: BETAFPVF411 (BEFH) OSD: Built-in BetaFlight OSD (OSD chip: AT7456E) Support programmable LED like WS2812 etc Built-in current sensor Weight: 6.63g Onboard 20A BLheli_S 4in1 ESC Support BLheli/BLHELI_S suite Pass-through readySupport PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600Input Voltage: 2-4S LipoContinuous Current: 20APeak Current: 25AFirmware: BLHELI_SMotor Connectors: 1.25mm header pins connector 1505 3600KV Brushless Motor Weight: 13.08g  (1 pc)Shaft: φ1.5mmMotor Mount Holes: M2KV (rpm/V): 3600KVInput Voltage: 3-4S LIPOCables: 80mm long, 24AWG cables HQProp 4025 2-Blade Propeller Material: Poly CarbonatesLength: 4 inches, about 101.6mmColor: Clear GrayMounting hole: 1.5mm Quantity: 2 CW & 2 CCWWeight: 1.4g/PC A01 5.8G 25/200mW VTX Output power: 0mW, 25mW and 200mW (Adjustable) Supply Voltage: 5V. NOT support connect to the 1S battery directly Weight: 2.0g Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz Blue LED Red LED Power Status Flash Solid OFF 25mW Flash Solid Flash Solid 200mW OFF Flash Solid Pit Mode How to Change Frequency & Channel & Power? Only support frequency and power change through the SmartAudio interface. Method 1: Use the OSD menu.  Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency and power. Method 2: Use the Betaflight GUI command.                                                                                                              We could also use the Betaflight CLI commands to change the frequency and power of the VTX. Caddx Ratel 1200TVL FPV Camera Image Sensor: 1/1.8" Inch starlight HDR sensor       Horizontal Resolution: 1200TVLFOV: 180 DegreeMin. Latency: 8msTV System: NTSC & PAL (changeable)Image: 16:9 & 4:3 (changeable)WDR: Super WDR (HDR)Min. Illumination: Starlight Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000S/N Ratio:  >60dB (AGC OFF)Video Output: CVBSCamera OSD: Separate OSDDNR: 3-DNR Recommend Lipo Battery (NOT Included) Recommend Use 4S 850mAh 75C Lipo Battery XT60 Plug Features: - The lightweight 4-inch toothpick below 250g even if you connect with the battery, meet the current requested of FAA rules. - Assembled 4'' frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g. - The first carbon fiber series installs Betafpv Toothpick 20A 2-4S AIO flight controller, which can supports up to 25A continuous currents. - Integrates with 1505 3600KV motor, X-Knight offers unparalleled execution in thrust and control. - Supports up to 850mAh 4S battery. It has plenty of power and punches to do all the tricks and flips you want. Package Included: 1x X-Knight 4Inch Toothpick FPV Drone 1x Set of M2*7 Screws

HGLRC Wind5 Lite TrueX 5 Inch 6S FPV Racing RC Drone 208mm Zeus F722 MINI 3-6S Flight Controller 45A BLHeli_32 4 In 1 ESC 2207.5 Blue Motor CADDX VISTA Version-Blue Motor Specification: Brand: HGLRC Item Name: Wind5 Lite True X FPV Racing Drone CADDX VISTA Version Net Weight:327.5g (Weight Without Receiver) Receiver: PNP / TBS CROSSFIRE NANO Wind5 Lite True X 5 Inch FPV Racing Frame   Type: 5 Inch FrameWheelbase: 208mmSupport for Propellers: up to 5.2 inchesOverall Size: 148*148mmWeight: 74.6g (Excluding TPU)  Zeus F722 MINI Flight Controller  MPU: MPU6000CPU: STM32F722 RET6Input Voltage: 3-6S LipoBEC Output: 5V/3A, 9V/2AWeight: 8.1g  Zeus 45A BLHeli_32 3-6S 4 In 1 ESC  CPU: STM32F051Input Voltage: 3-6S LipoSteady Current: 45APeak Current: 55A（10 Sec）Weight: 10.6g  CADDX VISTA Nebula Nano V2 Operating Frequency: 5.725-5.850 GHzInput Power: 7.4-17.6V about 4-9 WChannels: 8CHWeight: Air Unit (Camera Included):24g  Aeolus 2207.5 Brushless Motor  -Blue Aeolus 2207.5 1900KV Brushless Motor No.of Cells(Lipo):24.80 V (6S)Recommended Prop(inch):5InchWeight:37g Recommended Battery: (No Included)6S Battery: 1300mah-1600mAh Package Included:1 x Wind5 Lite 5 Inch FPV Racing Frame 1 x F722 MINI Flight Controller1 x 45A BLHeli_32 3-6S 4 In 1 ESC1 x CADDX VISTA Nebula Nano V24 x Aeolus 2207.5 Motor 1900KV-Blue8 x GEMFAN 51466 Propeller1 x Small Hammer Antenna (LHCP)4 x Battery Strap1 x Receiver (Optional)

Notice: Because CADDX Vista HD Digital System is out of stock, Caddx can not provide it anymore. At present, Protek25 HD comes with Caddx Nebula Pro HD Digital System. Our stock are mix with Vista HD and Caddx Nebula Pro, can not confirm what kind you will get. If you mind this, pls do not place order. April 24th, 2021.  Notice: The Camera and Camera Mount for Gopro are NOT Included. ONLY Include fixing mount Base. Specification: Brand: iFlight Model: Protek25 HD Item Name: 2.5 Inch 114mm F4 4S Whoop FPV Racing Drone Wheelbase: 114mm Bottom Plate Thickness: 3mm Upper Plate Thickness: 2mm Size: 97*68.7mm Weight: 194±10g Flight Controller Brand Name: iFlight Model: SucceX-D Whoop V3.0 Item Name: F4 Flight Controller AIO 20A 4in1 ESC Firmware Target: IFLIGHT_F411_PRO Connector: Micro-USBMCU: STM32F411Gyro: MPU6000Blackbox: 8MBBEC Output: 5V 2AINA Pad: nR2Barometer: No Size: 30.5x30.5mmMounting pattern: 25.5x25.5mm/φ3mm Onboard 20A BL_S 4in1 ESC Con. Current: 20A Burst Current: 25A BLHeli: BLHeli_SESC Telemetry: NoESC Firmware: G-H-30 BLS XING 1404 5500KV Brushless Motor Brand Name: iFlight Model: XING 1404 Item Name: 1404 5500KV 4S Motor Shaft Diameter: 1.5mm Mounting Hole: 9x9, M2 Weight: 9.3g Nazgul Protek 2525 Propeller Brand Name: iFlight Model: Nazgul Protek 2525 Item Name: 2525 2.5x2.5 2.5 Inch 3-Blade Propeller Quantity: 2 CW & 2 CCW Caddx Vista HD Digital System Brand Name: CaddxItem Name: Vista Kit Operating Frequency: 5.725-5.850GHz Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm Input Power: 7.4-26.4V DJI Camera Specifications: Sensor: 1/3.2'' CMOS Effective Pixels: 4M Lens: 2.1mm,f/2.1 FOV: 150° (D);122° (H);93° (V) Weight: Vista Kit(camera included): 29g Antenna: 3.5g Dimensions: Vista Kit: 30x29x13mm Camera: 27.4x21.1x20.1mm Coaxial Cable: 80mm Optional Receiver  BNF-DJI Version: with Built-in DJI Receiver; Frsky XM+ RX Version: with Built-in DJI RX and with External Frsky XM+ RX Frsky R-XSR RX Version: with Built-in DJI RX and with External Frsky R-XSR RX TBS Crossfire Nano RX Version: Built-in DJI RX and w/ External TBS Crossfire Nano Receiver Recommended Battery (No Included): Recommend 4S 850mAh 90C Lipo Battery XT30 Plug Flight Time: 7-9mins Features: 1. The 2.5-inch propeller has higher efficiency and strength; this product is easy to disassemble and easy to carry; reasonable power configuration, longer battery life. 2. Plastic protection ring, new design concept, lighter weight. 3. Excellent structural design brings a more enjoyable control feel to flight. 4. The frame is designed with inlaid copper pillars for easy disassembly and maintenance. It only needs to disassemble the top and bottom plates with a total of 12 screws. 5. With LED on the Drone Tail, the LED Color is changable which can reminds you the Battery consumption condition. 6. It is more flexible than Green Hornet for FPV Racing. Package Included: 1 x iFlight Protek25 HD 2.5 Inch 114mm Whoop FPV Racing Drone  4 x Propeller 1 x Battery Tie 1 x Screw Set 1 x EVA Cotton Strip

Specification: Brand: iFlight Model: Protek25  ( Analog Version) Item Name: 114mm F4 2.5 Inch 4S FPV Racing Drone  Wheelbase: 114mm Bottom Plate Thickness: 3mm Upper Plate Thickness: 2mm Size: 97x68.7mm Weight: 174±10g Flight Controller Brand Name: iFlight Model: SucceX-D Whoop V3.0 Item Name: F4 Flight Controller AIO 20A 4in1 ESC Firmware Target: IFLIGHT_F411_PRO Connector: Micro-USBMCU: STM32F411Gyro: MPU6000Blackbox: 8MBBEC Output: 5V 2AINA Pad: nR2Barometer: No Size: 30.5x30.5mmMounting pattern: 25.5x25.5mm/φ3mm Onboard 20A BL_S 4in1 ESC Con. Current: 20A Burst Current: 25A BLHeli: BLHeli_SESC Telemetry: NoESC Firmware: G-H-30 BLS XING 1404 5500KV Brushless Motor Brand Name: iFlight Model: XING 1404 Item Name: 1404 5500KV 4S Motor Shaft Diameter: 1.5mm Mounting Hole: 9x9, M2 Weight: 9.3g Nazgul Protek 2525 Propeller Brand Name: iFlight Model: Nazgul Protek 2525 Item Name: 2525 2.5x2.5 2.5 Inch 3-Blade Propeller Quantity: 2 CW & 2 CCW SucceX Micro Force 5.8GHz 300mW VTX Brand Name: iFlight Item Name: 5.8GHz SucceX Micro 300mW VTXPower: PIT/25/100/200/300mWAntenna interface: IPEX (UFL)VTX protocol : IRC TrampSize: 13.5x14.5mmWeight: 1.4g Caddx.us Turbo EOS V2 FPV Camera Model: Turbo EOS2 V2Image Sensor:  1/3" CMOS SensorHorizontal Resolution: 1200 TVL Optional Receiver  PNP Version: Without Receiver; Frsky XM+ Receiver Version: with Frsky XM+ Receiver TBS Crossfire Nano Receiver Version: with TBS Crossfire Nano Receiver Recommended Battery (No Included): Recommend 4S 850mAh 90C Lipo Battery XT30 Plug Flight Time: 7-9mins Features: 1. The 2.5-inch propeller has higher efficiency and strength; this product is easy to disassemble and easy to carry; reasonable power configuration, longer battery life. 2. Plastic protection ring, new design concept, lighter weight. 3. Excellent structural design brings a more enjoyable control feel to flight. 4. The frame is designed with inlaid copper pillars for easy disassembly and maintenance. It only needs to disassemble the top and bottom plates with a total of 12 screws. 5. With LED on the Drone Tail, the LED Color is changable which can reminds you the Battery consumption condition. 6. It is more flexible than Green Hornet and Bumblebee for FPV Racing. Notice: The Camera and Camera Mount for Gopro are NOT Included. ONLY Include fixing mount Base. Package Included: 1 x iFlight Protek25 2.5 Inch 114mm FPV Racing Drone (Analog Version) 4 x Propeller 1 x Battery Strap 1 x Screw Set 1 x EVA Cotton Strip

Notice: The Camera and Camera Mount for Gopro are NOT Included. ONLY Include fixing mount Base. Specification: Brand: iFlight Model: Protek35 HD Item Name: 3.5 Inch 151mm F4 4S Whoop FPV Racing Drone Wheelbase: 151mm Bottom Plate Thickness: 3.5mm Upper Plate Thickness: 2mm Size: 118*91mm Weight: 348±10g Beast AIO F7 45A FC ESC Brand Name: iFlight Model: Beast F7 45A AIO (MPU6000) 25.5x25.5 FC: MCU: BGA-STM32F745 Gyro: MPU6000 Blackbox: 8Mb Onboard Flash BEC output: 5V 2.5A  Barometer: BMP280 Connector: Micro-USB OSD: AT7456E FC Firmware：IFLIGHT_F745_AIO  Mounting pattern: 25.5*25.5mm φ3mm Dimensions: 32.5*32.5mm Weight: 8.5g ESC: Uarts: 5 Current Sensor: Yes Input: 2-6S LIPO Current scale: 200 Constant: 45A / Burst: 50A BLHeli: BLHeli-S Telemetry: no ESC Firmware: BlheliS G-H-30 Mounting pattern: 25.5*25.5mm/Φ3mm Dimensions: 32.5*32.5mm XING 2203.5 3600KV Brushless Motor Brand Name: iFlight Model: XING 2203.5 KV: 3600KV Lipo: 4S Nazgul 3535 Propeller Brand Name: iFlight Model: Nazgul 3535 Item Name: 3535 3.5x3.5 3.5 Inch 3-Blade Propeller Quantity: 2 CW & 2 CCW DJI FPV Air Unit Operating Frequency: 5.725-5.850 GHz Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm Low Latency Mode (720p/120fps): <28 ms High-Quality Mode (720p/60fps): <40 ms Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km Video Format: MP4 (Video format: H.264; Audio format: ACC-LC) I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot Operating Temperature Range: 32° to 104°F (0° to 40°C) Input Power: 7.4-17.6 V, about 4-9 W Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M Lens: 2.1 mm, f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150°(D); 122°(H); 93°(V) Dimension: 22.1 x 21.1 x 20.1 mm Weight: 8.2 g Optional Receiver  BNF-DJI Version: with Built-in DJI Receiver; Frsky XM+ RX Version: with Built-in DJI RX and with External Frsky XM+ RX Frsky R-XSR RX Version: with Built-in DJI RX and with External Frsky R-XSR RX TBS Crossfire Nano RX Version: Built-in DJI RX and w/ External TBS Crossfire Nano Receiver Recommended Battery (No Included): Recommend 4S 1550mAh Lipo Battery XT60 Plug Flight Time: 9-10mins   Flight Time(with camera for Gopro): 6-7mins Features: 1. The 3.5-inch propeller has higher efficiency and strength; this product is easy to disassemble and easy to carry; reasonable power configuration, longer battery life. 2. Plastic protection ring, new design concept, lighter weight. 3. Excellent structural design brings a more enjoyable control feel to flight. 4. The frame is designed with inlaid copper pillars for easy disassembly and maintenance. It only needs to disassemble the top and bottom plates with a total of 12 screws. 5. With LED on the Drone Tail, the LED Color is changable which can reminds you the Battery consumption condition. Package Included: 1 x iFlight Protek35 HD 3.5 Inch 151mm Whoop FPV Racing Drone 4S 4 x Propeller 1 x Battery Tie 1 x Screw Set 1 x EVA Cotton Strip