BETAFPV X-Knight 4 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone PNP BNF w/ 25/200mW VTX Caddx Ratel 1200TVL FPV Camera
Specification:
Brand Name: Betafpv
Model: X-Knight 4
Item Name: 160mm F4 AIO 20A ESC 4S 4 Inch Toothpick FPV Racing Drone
| X-Knight 4 160mm Frame Kit |
Material: T700 Carbon Fiber Wheelbase: 160mm Weight: 24.43g, Frame Height: 8mm Top plate thickness: 1.5mm Bottom plate thickness: 1.5mm Arm thickness: 4mm Battery protected plate thickness: 1.5mm |
||||||||||||
| F4 Flight Controller AIO 20A ESC Board |
Model: 20A Toothpick AIO FC V3 CPU: STM32F411CEU6 (100MHZ) Six-Axis: MPU6000 (SPI connection) Size: 32.5*32.5mm (26.5mm mounting holes) Firmware version: BETAFPVF411 (BEFH) OSD: Built-in BetaFlight OSD (OSD chip: AT7456E) Support programmable LED like WS2812 etc Built-in current sensor Weight: 6.63g Onboard 20A BLheli_S 4in1 ESC Support BLheli/BLHELI_S suite Pass-through ready |
||||||||||||
| 1505 3600KV Brushless Motor | Weight: 13.08g (1 pc) Shaft: φ1.5mm Motor Mount Holes: M2 KV (rpm/V): 3600KV Input Voltage: 3-4S LIPO Cables: 80mm long, 24AWG cables |
||||||||||||
| HQProp 4025 2-Blade Propeller |
Material: Poly Carbonates Quantity: 2 CW & 2 CCW |
||||||||||||
| A01 5.8G 25/200mW VTX |
Output power: 0mW, 25mW and 200mW (Adjustable)
Supply Voltage: 5V. NOT support connect to the 1S battery directly
Weight: 2.0g
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
How to Change Frequency & Channel & Power?
Only support frequency and power change through the SmartAudio interface.
Method 1: Use the OSD menu.
Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency and power. Method 2: Use the Betaflight GUI command. We could also use the Betaflight CLI commands to change the frequency and power of the VTX. |
||||||||||||
| Caddx Ratel 1200TVL FPV Camera |
Image Sensor: 1/1.8" Inch starlight HDR sensor Horizontal Resolution: 1200TVL FOV: 180 Degree Min. Latency: 8ms TV System: NTSC & PAL (changeable) Image: 16:9 & 4:3 (changeable) WDR: Super WDR (HDR) Min. Illumination: Starlight Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio: >60dB (AGC OFF) Video Output: CVBS Camera OSD: Separate OSD DNR: 3-DNR |
||||||||||||
| Recommend Lipo Battery (NOT Included) | Recommend Use 4S 850mAh 75C Lipo Battery XT60 Plug |
Features:
- The lightweight 4-inch toothpick below 250g even if you connect with the battery, meet the current requested of FAA rules.
- Assembled 4'' frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g.
- The first carbon fiber series installs Betafpv Toothpick 20A 2-4S AIO flight controller, which can supports up to 25A continuous currents.
- Integrates with 1505 3600KV motor, X-Knight offers unparalleled execution in thrust and control.
- Supports up to 850mAh 4S battery. It has plenty of power and punches to do all the tricks and flips you want.
Package Included:
1x X-Knight 4Inch Toothpick FPV Drone
1x Set of M2*7 Screws
| Receiver |
FUTABA Receiver, FrSky LBT, Frsky FCC, TBS Crossfire Receiver, Without receiver |
|---|
Please allow 7 - 15 business days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
for more information please visit our Shipping Policy page.
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
for more information please visit our Refund Policy page.