Filter

DJI Robomaster S1 STEAM DIY 4WD Brushless HD FPV APP Control Intelligent Educational Robot With AI Modules Support Scratch 3.0 Python Program - Toys Ace

DJI Robomaster S1 STEAM DIY 4WD Brushless HD FPV APP Control Intelligent Educational Robot With AI Modules Support Scratch 3.0 Python Program

Name: DJI Robomaster S1 STEAM DIY 4WD Brushless HD FPV APP Control Intelligent Educational Robot With AI Modules Support Scratch 3.0 Python Program
SKU: 111372
Price: 1528.99 USD
Availability: InStock

$1,528.99

8 in stock

SKU: 111372 Categories: RC Robot, Smart Robot Tags: 30, AI, APP, Brushless, Control, DIY, DJI, Educational, FPV, HD, Intelligent, Modules, Program, Python, Robomaster, Robot, Scratch, STEAM, Support, WD, with

Description:

Brand: DJI

Item: Robomaster S1

Product: Smart RC Robot

Battery: 2400Mah Rechargable Lipo Battery

APP, Manual, other information: Click here

Specifiction:

Camera

FOV:120°

Max Still Photo Resolution: 2560×1440

Max Video Resolution: FHD: 1080/30fps / HD: 720/30fps

Max Video Bitrate: 16 Mbps

Photo Format: JPEG

Video Format: MP4

Sensor: CMOS 1/4″; Effective pixels: 5 MP

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Narrow Infrared Units:

Effective Range [1]: 6 m (in indoor lighting conditions)

Effective Area: Varies from 10°to 40°

Effective area decreases as distance from the target increases.

Wide Infrared Units:

Effective Range [1]: 3 m (in indoor lighting conditions)

Effective Width: 360° (in indoor lighting conditions)

Hit Detector:

Detection Requirements: For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°.

Maximum Detection Frequency: 15 Hz

DJI Robomaster S1:

Weight: Approx. 3.3 kg

Dimensions: 320×240×270 mm (length × width × height)

Chassis Speed Range:

0-3.5 m/s (forward)

0-2.5 m/s (backward)

0-2.8 m/s (sideways)

Max Chassis Rotational Speed: 600°/s

M3508I Brushless Motor:

Max Rotational Speed: 1000 rpm

Max Torque: 0.25N*m

Max Output Power: 19 W

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Driver: FOC

Control Method: Closed-loop speed control

Protection: Overvoltage/Overtemperature/Soft-start/Short-circuit/Chip and sensor anomaly detection

Control:

Controllable Launching Frequency: 1-8/s

Max Launching Frequency: 10/s

Initial Launching Speed: Approx. 26 m/s

Average Load: Approx. 430

Gimbal:

Controllable Range: Pitch: -20° to +35°/ Yaw: ±250°

Mechanical Range: Pitch: -24° to +41° / Yaw: ±270°

Max Rotational Speed: 540°/s

Vibration Control (on the flat surface): ±0.02°

Intelligent Controller:

Latency (depending on environmental conditions and mobile device):

Connection via Wi-Fi: 80-100ms /Connection via Router: 100-120ms

(unobstructed, free of interference)

Live View Quality: 720p/30fps

Max Live View Bitrate: 6 Mbps

Operating Frequency: 2.4 GHz, 5.1 GHz, 5.8 GHz

Operating Mode: Connection via Wi-Fi, Connection via Router

Max Transmission Distance (unobstructed, free of interference):

①Connection via Wi-Fi:

FCC, 2.4 GHz 140 m, 5.8 GHz 90 m

SRRC, 2.4 GHz 130 m, 5.8 GHz 130 m

MIC, 2.4 GHz 140 m

②Connection via Router:

FCC, 2.4 GHz 180 m, 5.8 GHz 300 m

SRRC, 2.4 GHz 180 m, 5.8 GHz 300 m

MIC, 2.4 GHz 170 m, 5.1 GHz 180 m

Transmission Power (EIRP):

①2.400-2.4835 GHz

FCC: ≤30 dBm

SRRC: ≤20 dBm

MIC: ≤20 dBm

②5.170-5.25 GHz

FCC: ≤30 dBm

SRRC: ≤23 dBm

MIC: ≤23 dBm

③5.725-5.850 GHz

FCC: ≤30dBm

SRRC: ≤30dBm

Transmission Standard: IEEE802.11a/b/g/n

Intelligent Battery:

Capacity: 2400 mAh

Nominal Charging Voltage: 10.8 V

Maximum Charging Voltage: 12.6 V

Battery Type: LiPo 3S

Energy: 25.92 Wh

Weight: 169 g

Operating Temperature Range: -10 to 40 °C (14 to 104 °F)

Charging Temperature Range: 5 to 40 °C (41 to 104 °F)

Maximum Charging Power: 29 W

Battery Life in Use: 35 minutes (measured at a constant speed of 2 m/s on a flat surface)

Battery Life on Standby: Approx. 100 minutes

Charger:

Input: 100-240 V, 50-60Hz, 1A

Output Port: 12.6 V=0.8A or 12.6 V=2.2A

Voltage: 12.6 V

Rated Voltage: 28 W

Gel Bead:

Diameter: 5.9-6.8 mm [2]

Weight: 0.12-0.17 g [2]

App:

App: RoboMaster

iOS: 9.0 or later

Android: Android 5.0 or later

Router:

Recommended Routers:

TP-Link TL-WDR8600; TP-Link TL-WDR5640 (China)

TP-Link Archer C7; NETGEAR X6S (International)

Supported SD Cards: capacity up to 64GB

Recommended outdoor power supply solution for routers: Laptop Power Bank (match the input power of the router)

DJI Robomaster S1 STEAM DIY 4WD Brushless HD FPV APP Control Intelligent Educational Robot With AI Modules Support Scratch 3.0 Python Program

Weight	5.96 lbs

Shipping information Please allow 7 - 15 business days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.