Pre-order
Out stock

Holybro PIX32 V5 Pixhawk Flight Controller 32 Bit Arm STM32F765 2MB MS5611 Barometer for RC Drone Multirotor

$502.99$323.99

You Save: $179.00 (36%)

PRODUCT INFORMATION
Shipping information
Return and Exchanges
PRODUCT INFORMATION

Holybro PIX32 V5 Pixhawk Flight Controller 32 Bit Arm STM32F765 2MB MS5611 Barometer for RC Drone Multirotor



HolyBro Pix32 v5 is a new flight controller we have developed on the base of FMUv5 scheme, which can be regarded as a variant version of 'Pixhawk4'. The Pix32 v5 is comprised of a separate flight controller and carrier board which are connected by a 100pin connector. It is designed for those pilots who need a high power, flexible and customisable flight control system. By using a carrier board designed for the style of model you need you can make sure that the physical size, pinouts and power distribution requirements match the model perfectly. Different carrier boards designed for multirotors, fixed wing aircraft, ground based vehicles or even water based models ensure that you have all the connections you need and none of the expense and bulk of connectors you don’t. We have made the carrier board schematics public, you can either make a custom carrier board by yourself or just let HolyBro help you with it. If you’ve tried to use a PixHawk4 but struggled to make it work with your design then the Pix32 v5 may be the answer with its ability to fit within a custom carrier board with just what you need. As the Pix32 v5 is based on the PX4 and ArduPilot systems you can also take advantage of all of the latest peripherals, software and enhancements offered by those systems for a quick easy setup and flying experience.



Technical Specifications 

Main FMU Processor: STM32F765

- 32 Bit Arm ® Cortex®

-M7, 216MHz, 2MB memory, 512KB RAM 

IO Processor: STM32F100

- 32 Bit Arm ® Cortex®

-M3, 24MHz, 8KB SRAM 

On-board sensors

- Accel/Gyro: ICM-20689

- Accel/Gyro: BMI055

- Mag: IST8310 - Barometer: MS5611

GPS: ublox Neo-M8N GPS/GLONASS receiver; integrated magnetometer IST8310


Interfaces

8-16 PWM servo outputs (8 from IO, 8 from FMU)

3 dedicated PWM/Capture inputs on FMU

Dedicated R/C input for CPPM

Dedicated R/C input for Spektrum / DSM and S.Bus

with analog / PWM RSSI input

Dedicated S.Bus servo output

5 general purpose serial ports

- 2 with full flow control

- 1with separate 1.5A current limit

3 I2C ports

4 SPI buses

- 1 internal high speed SPI sensor bus with 4 chip selects and 6 DRDYs

- 1 internal low noise SPI bus dedicated for

- Barometer with 2 chip selects, no DRDYs

- 1 internal SPI bus dedicated for FRAM

- Supports dedicated SPI calibration EEPROMlocated on sensor module

- 1 external SPI buses • Up to 2 CANBuses for dual CAN with serial E

- Each CANBus has individual silent controls or ESC RX-MUX control

Analog inputs for voltage / current of 2 batteries

2 additional analog inputs


Electrical Data

Voltage Ratings:

Power module output: 4.9~5.5V

Max input voltage: 6V

Max current sensing: 120A

USB Power Input: 4.75~5.25V

Servo Rail Input: 0~36V


Mechanical Data

Dimensions: 45x45x13.5mm

Weight: 33.0g


Environmental Data, Quality & Reliability

Operating temp. -40~85℃

Storage temp. -40~85℃ 

CE

FCC

RoHS compliant (lead-free)


Holybro_PIX32-V5_technical_data_sheet.pdf

Holybro_PIX32-V5_PINOUTS.pdf


Package Included:

1 x PIX32 V5 Flight Controller




Shipping information

Please allow 7 - 15 business days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

Return and Exchanges

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Desk Novalty Wooden Soma Cube Puzzle IQ Mind Box Brain Teaser Game for Adults Kids
Hot
New
Pre-order

  Product information: 3C configuration category: wooden toys under 14 years oldMaterial: WoodenWhether it is multifunctional: NoPaint surface material: water-based environmentally friendly paintWood classification: BeechWooden building block type: building block Size information:5.5*5.5cmPacking list : Wooden toys*1 Product picture:

$24.99
Celtic Wolf and Crow Double-Sided Axe Pendant
Hot
New
Pre-order

  Product information:material: metalTreatment process: electroplatingModeling: geometricPackaging: Individually packedColor: gold, silverPacking listClavicle chain x1

$10.99
Twister Twister Rope 18 Knots Wrapped for Adults
Hot
New
Pre-order

Product information: Product name: TwisterProduct size :3.5*3.5*3.8cmMaterial: plastic/plasticProduct category :M buckleProduct weight: about 20g Packing list: Plastic twister*1

$10.99
Doctors Toys for Children Pretend Play Nurse Doctor Cloth
Hot
New
Pre-order

Specification:   Applicable people: No limitationFeatures: Nurse uniformsPacking: OPP bagToy material: PVCAbility cultivation: intellectual development, hearingWhether there is an anime image: NoIs there a shopping guide video? NoType: Nurse's uniform

$11.99
Poke Le wool felt handmade DIY villain doll
Hot
New
-36%
Pre-order

product information:Name: felt bagMaterial: woolThis product is not a final product, you need to do it yourselfBuy 1 material package and get 1 workbench, 3 poke needles (one thick, medium and thin) 6mlA piece of glue...

$30.99$19.99
Japanese Home Pillow Flower Cushion
Hot
New
-30%
Pre-order

Specification:Specifications: 40cmmaterial: PlushPlush classification: Crystal super softFilling material: Down cottonSize: 40cmControl method: Force controlPacking method: Net bagCartoon, anime type: Flowers3C configuration category: Toys over 14 years oldHeight: 40*8cmApplicable age: Youth (15-35 years old)Packing list: cushion x1

$26.99$18.99
Cute Soft Chubby Dinosaur Doll
Hot
New
-41%
Pre-order

Product Information:Modeling category: AnimalAnimal classification: DinosaurFilling material: PP cottonPlush classification: short plushHeight: 20cm

$26.99$15.99
The imperial navy the imperial soldier the naval governor assembles the little man toy
Hot
New
-30%
Pre-order

[product description] :  imperial navy series --8 styles/set (please press the multiple of 8)   [commodity materials] : ABS environment-friendly plastics[packing method] : OPP bag packing[toy type] : small particle assembled building block accessories[doll size] : doll height is about 4.5cm[suitable...

$26.99$18.99
FREE SHIPPING

Free shipping on all orders

SECURE CHECKOUT

We use encrypted SSL security

30 DAYS RETURN

You have 30 days to return

Holybro PIX32 V5 Pixhawk Flight Controller 32 Bit Arm STM32F765 2MB MS5611 Barometer for RC Drone Multirotor
$502.99$323.99