SKYSTARS STX225 DIY Version 225mm RC FPV Racing Drone PNP w/ F405 AIO RGB LED 1200TVL 600mW VTX
Specification:
Brand name: SKYSTARS
Item name: STX225 DIY version FPV racing drone PNP
Recommended 3 - 4S 1300 - 1500mAh battery (package not included)
Frame kit |
● Wheel base: 225mm ● Frame arm thickness: 4mm ● Bottom plate thickness: 2mm ● Side plate thickness: 2mm ●Frame kit material: 3K carbon fiber |
2205 2300KV Brushless Motor | Motor KV: 2300RPM/V Idle current (Io/10V): 1.26A Lipo cell: 3-5S Weight: 26g Max continuous current: 25A Max continuous power: 240W Max thrust: 700g (4S/5") Configu-ration: 12N/14P Motor resistance (RM): 0.0572 Ω Stator diameter: 22mm Stator thickness: 4mm Motor diameter: 27.55mm Motor body length: 20mm Overall shaft length: 34.2mm Prop adapter shaft: M5 Bolt holes spacing: 16mm Bolt thread: M3 Propeller: 5inch |
35A BLHeli_32 RGB LED ESC | Continuous current: 35A Peak Current: 40A(10S) Input voltage: 2-5S BEC: NO bec Main control chip: STM32F051 Firmware: BLHeli_32 supports 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150/300/600/1200. |
F405AIO | Updated. Click For Details ● Inculd barometer. ● Sensor: MPU6000 ● Power supply: 5V ● Integrated OSD
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x pair I2C1 pads
1x press button for BOOT(DFU) mode
|
1200TVL CMOS Camera | Case size: 19mm*19mm Weight: 9.5g Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP) Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP) Signal system: PAL/NTSC switchable Resolution ratio(horizontal center): 1200TVL Video output: 1.0Vp-p/75Ω Automatic gain control: yes White balance: on/off optional Exposure mode: electron exposure Electronic shutter: 1/50(1/60) - 1/100000 S Gamma correction: 0.45/1.0 Synchronization method: inter-sync Camera lens: standard 2.3mm Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V) Working current: 70mA (low power consumption) Working temperature: -20℃~-60℃ Humidity: 0%~98% |
600mw switchable VTX |
Frequency band: A - E ( 8 channels in each band ) Transmitting power: 600mW Full video format: NTSC / PAL Transmission distance: more than 0.5km ( 25mW ), more than 1km ( 200mW ), more than 2km ( 600mW ) With output power self-check function |
5042 3 Blade Propeller | Material: PC |
Note: Battery is Not Included.
Package included:
1x STX225 DIY version FPV racing drone PNP
Please allow 7 - 15 business days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
for more information please visit our Refund Policy page.